|
|||||||
|
|
|
|||||
|
|
|||||||
The Spin Klin spine holds the discs.It enables compression of the
grooved discs which creates the filtration element during the filtration
process.
See Disc filtration Technology for more details
Features:
Holds disc stack for micron-precise filtrarion of solids.
Corrosion-resistant spine and housing.
Innovative depth filter design captures and retains large
amounts of solids-for longer filtration cycles.
Short, efficient backflush process-saves water and energy.
Easy and term operation with little maintenance.
Spin Klin Technology
The Spin Klin @discs are stacked on the Spin Klin@spine. The discs are
color - coded by micron size, and are assembled according to your water
filtration requirements. The spine assembly has a spring compression unit
and an internal piston which operate during alternate filtering or backflush-
ing modes.
The spine assembly is specially designed to compress the micron - grooved
discs inside a corrosion and pressure ressitant housing. Inside the
housing, a spring and the pressure difference compress the discs tightly
during the filtration process, forcing the water to flow between the grooves
and traps of the stacked discs.
Spin Klin @ Automatic Backflush Operation :
Activated by a pre-defined command ( differential pressure or time )
alternate units for the Spin Klin@ system go into backflush operation.
The inlet valve is shut as the drain is automatically opened.
During the backflush process, the compression spring is released
and the pressure difference is eliminated. The spine piston climbs up,
releasing the pressure on the discs. Tangential jets of clean water are
hydraullically pumped at high pressure in the opposite direction
though nozzles at the center of the spine. The discs spin free and
clear, loosening the trapped solids. Solids are quickly and efficiently
flushed out through the drain.